Wildlife fences, noise barriers and guardrails are essential elements for increasing road safety, especially along motorways and expressways. Overgrowth caused by climbing plants can significantly reduce visibility, stability and service life. In winter, the increased surface area leads to higher snow accumulation and therefore greater snow loads. In the worst case, this can pose a serious danger to both people and animals.

Manually clearing vegetation from wildlife fences is strenuous and time-consuming. Personnel are exposed to numerous hazards such as the risk of injury, noise, heat, and dust. With the patented* T-1500 wildlife fence brush, dangerous and unpleasant tasks that previously required several people working for many hours can now be completed by a single operator in just a few minutes — safely from a protected, air-conditioned cab.

Depending on the type and extent of vegetation, time savings of up to 95% are possible.

As a result, cleaning operations can be carried out at shorter intervals. This leads to a longer service life of the fences and significantly increases safety for both wildlife and road traffic.

The T-1500 was developed and patented by Teufl GmbH in Austria. Production also takes place in Austria.

The majority of suppliers are also based in Austria.

• up to 95% time savings
• work from the protected cabin
  • less noise
  • no heat
  • no dust
  • no risk of falling
• increased safety for wildlife and road traffic
• longer service life of the fences

• Max. speed: 300 rpm (intermittent up to 360 rpm)
• Min. speed: 6 rpm
• Displacement: 250 cm³/rev
• Operating presure: 140-200 bar (intermittent up to 250 bar)
• Max. torque: 720 Nm (intermittent up to 870 Nm)
• Max. continuous rated power: 14.5 kW (intermittent up to 18 kW)
• Max. flow rate: 75 l/min (intermittent up to 90 l/min)
• Dimensions: 1,500 × 650 × 755 mm
• Working width: 1.000 mm
• Weight: approx. 300 kg
• Patents: AT527605, additional patents pending

• High quality Teufl standard brush set
• Pipe guard to protect against rebounding material
• Hydraulic dual shock valve to protect the hydraulic system and machine, factory preset to 130 bar
• Standard 4-hole mounting plate for easy and secure installation
• Hydraulic hoses with flat-sealing couplings (BG 4 & BG 3) for immediate connection
• No electrical connections required; fully hydraulic operation
• Galvanized transport and storage cradle with narrow-side fork pockets; forklift pickup also possible from the long side

• Hydraulische Anpassungen je nach Einsatzgebiet nach vorheriger Abklärung möglich.
• Kundenspezifische Modifikationen oder Sonderanfertigungen können bei Auftragserteilung berücksichtigt werden.
• Loop Flushing Valve (Spülventil), voreingestellt auf 10 l/min für den geschlossenen Hydraulikkreislauf, speziell für ENERGREEN Geräteträger.

• Die Bürste ist auf maximale Effizienz bei standardmäßigen Betriebsdrücken ausgelegt.
• Die mechanische Konstruktion ermöglicht einen langlebigen Einsatz auch unter anspruchsvollen Bedingungen.
• Gewicht und Abmessungen sind ungefähre Angaben, leichte Abweichungen je nach Ausstattung möglich.

Do you have any specific questions?